Schecter C-1 Standard Electric Guitar

One of the most elegant and well-finished guitars we've seen. And THEN it's one of the best sounding we have!

Specs-

Contruction: Set Neck w/ Ultra Access
Body: Mahogany w/ Flamed Maple
Neck: 3-Piece Maple
Fingerboard: Rosewood
Frets: 24 Medium
Inlay: Dots
Binding: Creme
Tuners: grover
Pickups: Duncan Designed HB-102b / HB-101n
Electronics: Volume / Volume / Tone (Tap) / 3-Way Switch
Bridge: TonePros TOM w/ Thru-Body
Scale: 24.75"
Hardware: Chrome
Finish: Black Cherry

Features-

Grover Rotomatics Tuners with 18:1 gear ratio (102-18 Series): The original Rotomatic with an improved higher ratio gearing. The 18:1 ratio provides for finer tuning and greater stability. The finer gears provide smoother tuning and a higher degree of backlash elimination

Rosewood Fingerboard: The most common fretboard, Rosewood is naturally oily, and works well for any surface that sees frequent human contect. The sound is richer in fundamental than Maple because the stray overtones are absorbed into the oily pores.

Duncan Designed HB-102b / HB-101n Pickups:

Bridge -- The HB-102 was modeled after Seymour Duncan's USA-made SH-4 JB bridge. Like the HB-101s, this pickup also uses Alnico 5 magnets, but have a hotter winding spec, based on the world's most popular "hot-rodded" humbucker. The bridge pickup is Trembucker-spaced.
Neck -- The HB-101 was patterened after the Seymour Duncan SH-1 '59 Model humbucker set. It uses an Alnico 5 magnet and winding spec based on the revered 1955-1960 P.A.F.

3-Piece Maple Neck: Made with 3 pieces of Maple for extra stability. 3 piece necks can withstand the test of time. Where standard necks may show aging defects fro mtemperature and moisture changes throughout the years, the 3 piece neck will stay nice and straight for a lifetime of playability